Explore Dika Ops

How do I calculate depreciation on business equipment?

How do I calculate depreciation? Use cost, residual value and useful life for a straight-line schedule, with a worked example and a monthly journal entry.

7 min read Business software
Hand-drawn line graph on squared paper with a metal ruler and pens on a wooden desk

To calculate depreciation with the straight-line method, subtract the residual value of an asset from its cost, then divide the result by its useful life in years. A machine that cost £12,000, with an expected residual value of £2,000 and a useful life of five years, depreciates by £2,000 a year. Each year its book value falls by that amount until it reaches the residual value.

Depreciation is not a cash payment. You paid for the asset when you bought it. The charge spreads that cost across the years in which the asset helps you sell, make or deliver things, so your profit reflects the true cost of running the business. Without it, a large purchase would make one year look very bad and every later year look artificially good.

This guide explains the terms, shows the steps and a full five-year schedule, and covers the monthly journal entry that records the charge. The method is a practical starting point. The useful life you choose and the rules you follow should match your accounting policy and local tax rules, so confirm them with your accountant before you rely on a schedule.

The terms you need

Four terms appear in every depreciation calculation. Get these clear before you touch a spreadsheet, because most errors come from confusing the cost with the book value, or the residual value with the scrap value.

TermWhat it meansExample
CostThe full amount paid to get the asset ready for use, including delivery and installation£12,000
Residual valueThe amount you expect to recover when you stop using the asset£2,000
Useful lifeThe number of years you expect to use the asset in your business5 years
Net book valueCost minus the depreciation charged so far£12,000 at the start, £2,000 at the end

Step-by-step: how to calculate depreciation

  1. Record the full cost. Include the purchase price plus delivery, installation and any set-up cost needed to make the asset work.
  2. Estimate the residual value. Be realistic. Look at what similar assets sell for after a similar period, or what a dealer would offer. If you have no basis for an estimate, many businesses use zero, and they state that choice in the policy.
  3. Estimate the useful life. Use the period over which the asset will be useful to you, not its physical life. A laptop used for three years in a sales team may be useful for three years even if it still works after five.
  4. Subtract the residual value from the cost. The result is the depreciable amount.
  5. Divide by the useful life. The answer is the annual depreciation charge.
  6. Divide the annual charge by twelve for a monthly figure. Use the monthly figure if you record depreciation each month.
  7. Track the book value. Subtract each year's charge from the opening book value. The asset stops being depreciated once it reaches its residual value.

A five-year schedule, worked through

The figures below are invented to show the arithmetic. Your own assets will have their own cost, residual value and life.

YearOpening book valueDepreciation chargeClosing book value
1£12,000£2,000£10,000
2£10,000£2,000£8,000
3£8,000£2,000£6,000
4£6,000£2,000£4,000
5£4,000£2,000£2,000

The closing value at the end of year five equals the residual value, which confirms that the schedule is complete. The total charged over the five years is £10,000, the depreciable amount.

Phone screen showing a financial chart with a pen resting on the device
A depreciation schedule is easiest to review when the book value is charted year by year beside the actual cost of the asset.

Straight-line and reducing balance

Straight-line is the most common method for internal records because it is simple and predictable. Some businesses use a reducing balance method instead, which applies a fixed percentage to the opening book value each year. That front-loads the charge, so the early years show more depreciation and the later years less.

MethodHow the charge worksWhen people use it
Straight-lineThe same amount each yearAssets with steady use, and simple internal reporting
Reducing balanceA fixed percentage of the opening book value each yearAssets that lose value quickly early on, such as vehicles or computers

Whichever method you choose, apply it consistently to the same class of asset. Changing the method part-way through a schedule needs a clear reason and usually your accountant's agreement.

Recording depreciation each month

Most businesses post depreciation monthly, so the profit each month reflects the cost of the assets used in it. Using the example above, the annual charge of £2,000 becomes about £166.67 a month. The entry debits a depreciation expense account and credits an accumulated depreciation account, which is shown against the asset on the balance sheet.

The accumulated depreciation grows each month until it equals the depreciable amount. Your balance sheet then shows the cost of the asset, less the accumulated depreciation, which gives the net book value. Keep the asset register up to date with the date of purchase, the cost, the life and the method, so anyone can check the figures later.

Common mistakes

  • Leaving out installation or delivery. These costs are part of the cost of getting the asset ready for use, so they belong in the depreciable amount.
  • Depreciating land as if it wears out. Land is normally not depreciated, while buildings on it may be. Check the treatment with your accountant.
  • Using a useful life that does not match your use. A machine that will be replaced in three years should not be depreciated over ten.
  • Forgetting the residual value. Depreciating the full cost to zero overstates the charge if you expect to sell the asset.
  • Continuing to depreciate after the asset is disposed of. Stop the charge in the month you sell, scrap or retire the asset, and record any gain or loss on disposal.

Frequently asked questions

Is depreciation the same as paying for an asset?

No. Paying for the asset is a cash event at purchase. Depreciation is the accounting charge that spreads the cost across the years in which the asset is used. Cash and profit therefore move differently.

What is the difference between depreciation and amortisation?

Depreciation applies to physical assets such as equipment and vehicles. Amortisation applies to intangible assets such as software licences or patents. The arithmetic is similar, and both spread a cost over a useful life.

Can I depreciate an asset I bought second-hand?

Yes. Use the cost you paid, plus any cost to make the asset usable, and estimate a useful life from its remaining life rather than from new.

Does depreciation reduce my tax bill?

Accounting depreciation is not the same as the allowance your tax authority gives for capital spending. Tax rules have their own rates and conditions, so check them with your accountant rather than assuming the two figures match.

Do I need software to calculate depreciation?

For a few assets, a spreadsheet with the cost, residual value and life is enough. As the asset list grows, a register in your accounting or operations system makes it easier to post the monthly entries and to keep the records consistent.

Next step

List your three most expensive assets, write down the cost, a realistic residual value and the useful life for each, and build a five-year schedule using the steps above. Check the method and lives with your accountant before you post the entries. Our free tools cover other business calculations, and the month-end close checklist shows where the monthly depreciation entry fits in the close.

When assets, purchasing and accounting sit in one system, the register and the monthly charge are easier to keep consistent. Dika Ops covers finance and accounting alongside purchasing and inventory, so asset purchases and the entries that follow from them are recorded from the same business events. If you need a register or workflow built around your own processes, see our enterprise applications work, or talk to us. To understand the cash side of the same purchase, read our guide to cash flow management, and for the choice of systems, how to choose accounting software. From Dika Design, we are glad to talk through how asset records should look for your business.

Have a project in mind? Let us talk it through.

Tell us what you want to improve. We will reply with a clear next step.