Explore Dika Ops

How Do I Calculate Employee Turnover Rate? Formula and Example

Calculate employee turnover rate with the standard formula, average headcount rules, a worked example and checks that make the figure useful to managers.

7 min read Business software
Four colleagues reviewing documents together at a wooden table

To calculate employee turnover rate, divide the number of employees who left during a period by the average number of employees in that period, then multiply the result by 100. The average headcount is the number at the start of the period plus the number at the end, divided by two. The result is a percentage that shows how much of your workforce was replaced in that time.

The formula is easy. Most of the errors come from deciding who counts as a leaver, which headcount to use, and whether the period is a month, a quarter or a year. This guide gives you a rule for each decision, a worked example with the numbers shown, and the checks that stop the figure from misleading managers.

Turnover is one of the few HR numbers that combines recruitment, pay, management and workload, so it repays careful measurement. If your employee records are spread across spreadsheets, the first job is to make the leaver data reliable. If you are still deciding how HR fits into your wider systems, our what ERP software is guide and our ERP for small business guide explain the options.

The formula, written out

Use this formula for any period you choose, most often a calendar year:

Turnover rate (%) = number of leavers in the period ÷ average headcount in the period × 100

Average headcount is calculated as follows:

Average headcount = (headcount at start of period + headcount at end of period) ÷ 2

Use the average rather than the year-end headcount. A company that grew quickly in the second half of the year would otherwise have a turnover rate that looks lower than the real experience of the people working there.

Decide who counts as a leaver

A leaver is someone whose employment with your company ended during the period. The rule matters because it changes the numerator. Write your definition down, apply it to every period, and share it with anyone who reports the figure. The table below covers the cases that cause the most arguments.

EventCount as a leaver?Note
ResignationYesCount in the period that contains the last working day
Dismissal or redundancyYesTrack separately if you want voluntary turnover alone
RetirementYesUsually reported as a separation
End of a fixed-term contractDepends on your ruleDecide once and apply it to every contract
Internal transfer within the companyNoThe person is still employed by you

If you employ part-time or temporary staff, decide whether they count as heads or as full-time equivalents, and state that in your definition. Mixing the two methods between periods is one of the most common causes of a misleading trend.

Step-by-step: calculating the rate

Work through these steps for each period. Keep the source list of leavers so that you can answer questions about any figure later.

  1. Set the period. Choose a year, quarter or month, and use the same dates for every calculation that you compare.
  2. Count leavers. List every employee whose last day falls in the period, using your definition from the previous section. Count each person once.
  3. Find headcount at the start and end. Take the number of active employees on the first and last day of the period.
  4. Calculate average headcount. Add the two numbers and divide by two.
  5. Divide and multiply. Divide leavers by average headcount, then multiply by 100 to express the result as a percentage.
  6. Split the result if it helps. Calculate voluntary turnover separately from total turnover, so that managers can see which part they influence.

A worked example you can check by hand

The example below uses assumed figures for a company with 50 employees at the start of the year and 56 at the end. The numbers illustrate the method; they are not a benchmark for any industry.

LineValue
Headcount on 1 January50
Headcount on 31 December56
Average headcount: (50 + 56) ÷ 253
Leavers during the year (all causes)11
Turnover rate: 11 ÷ 53 × 10020.8%
Voluntary leavers (resignations only)8
Voluntary turnover rate: 8 ÷ 53 × 10015.1%

The company replaced about one in five of its average workforce during the year, and about one in seven left by choice. The gap between the two numbers tells you that three people left for other reasons, which is worth a separate look at contract ends or dismissals.

Monthly and quarterly figures

You can calculate turnover for shorter periods, but do not simply multiply one month by 12 to get an annual figure. Turnover is seasonal in many businesses, so a single month can be unusually high or low. The more accurate method is to add the leavers across the twelve months, divide by the average headcount for the year, and multiply by 100.

For management reviews, a rolling twelve-month figure is often more useful than a monthly one. It smooths out holiday periods and shows whether the trend is improving or worsening.

Common mistakes that distort the figure

  • Using year-end headcount only. A fast-growing team will show a lower rate than its experience justifies, and a shrinking team a higher one.
  • Counting internal transfers as leavers. People who move between departments are still working for you and should not appear in the leaver list.
  • Counting people twice. Someone who leaves and is rehired within the same period needs a clear rule, otherwise they appear twice.
  • Comparing across different definitions. If one year excludes fixed-term ends and the next includes them, the trend is meaningless.
  • Ignoring early leavers. People who leave within their first few months often point to hiring or onboarding issues that the annual figure hides.

Making the number useful to managers

A turnover rate on its own tells you that people are leaving, not why. Pair it with the reasons employees give at exit, time to fill open roles, and the share of leavers who had been with the company for less than a year. Compare teams and locations using the same definition, and avoid quoting external benchmarks unless you know exactly how they were measured.

Accurate leaver data is the foundation for all of this. In Dika Ops, HR records sit alongside the rest of the business on one record, so leaver dates and reasons can be reported from the same source as the rest of your operations. If your employee data is spread across several files, our team at Dika Design can help you bring it together through our data platforms and business intelligence work, or build custom reporting through our enterprise applications service.

Team members meeting around a table in a bright office
Reviewing leavers and hires together each quarter makes turnover easier to explain and act on.

Frequently asked questions

What is a good employee turnover rate?

There is no single good figure. Acceptable levels depend on the sector, the roles, the pay market and the region. The most useful comparison is your own history over several years, measured with the same definition, followed by peers whose figures you can verify.

Should temporary and contract staff be included?

Many companies report permanent employees separately from temporary or contract staff, because the two groups behave differently. Whichever approach you choose, state it in your definition and apply it consistently.

Is turnover rate the same as attrition rate?

The two terms are often used interchangeably in HR reporting. Some organisations use attrition for total departures and turnover for replacement hiring, so check how your own reports define each term before you compare figures.

How do I calculate turnover for a single month?

Divide the number of leavers in the month by the average of the headcount at the start and end of that month, then multiply by 100. Remember that a single month can be distorted by seasonal patterns, so review the rolling twelve-month figure alongside it.

Do employees who leave during probation count?

Yes, if they were employed and then left, they count as leavers in the period. Track them separately as early leavers, because the reasons and the fixes are often different from those for longer-serving staff.

Summary and next step

To calculate employee turnover rate, divide leavers by average headcount for the same period and multiply by 100. Write down your definition of a leaver, use average rather than year-end headcount, and keep the method fixed so that the trend is meaningful. If you want leaver data, headcount and reporting in one system, request a demo of Dika Ops and we can show you how the HR module connects to the rest of the business.

Have a project in mind? Let us talk it through.

Tell us what you want to improve. We will reply with a clear next step.