To calculate FTE (full-time equivalent), add up the hours worked by everyone in a team over a period, then divide that total by the standard full-time hours for the same period. The result tells you how many full-time posts your workforce represents, which is often a very different number from the headcount. Six people working 20 hours a week make 3 FTE, not 6.
The formula is short, but the answer depends on three decisions: whether you count worked or paid hours, what you use as the full-time standard, and how you treat leave, overtime and temporary cover. Make those decisions once, write them down, and apply them to every role. This guide shows the method step by step, works through an example, and points out the errors that most often distort staffing reports.
FTE matters because managers plan with it. Rotas, budgets and capacity forecasts all depend on it, and a headcount figure alone can hide a team that is stretched or one that has more capacity than it appears.
What FTE measures and why headcount is not enough
Headcount counts people. FTE counts the time those people give you, scaled to a full-time post. A full-time colleague contributes 1 FTE, a colleague who works three days a week contributes about 0.6 FTE, and a colleague on a fixed short shift contributes whatever their hours represent. The table below shows how five different working patterns translate into FTE, using a 40-hour standard week.
| Role and working pattern | Hours per week | FTE contribution |
|---|---|---|
| Full-time operations manager | 40 | 1.0 |
| Full-time warehouse operative | 40 | 1.0 |
| Part-time customer service agent | 20 | 0.5 |
| Part-time bookkeeper, three days | 24 | 0.6 |
| Weekend stock assistant | 16 | 0.4 |
Note that the operations manager and the warehouse operative are both 1.0 FTE, even if one earns more than the other. FTE is about hours, not pay, so use it for capacity planning and keep pay analysis in a separate report.
Step-by-step: calculating FTE for a team
Use the same steps for each period you report, whether that is a week, a month or a quarter. Keep the working sheet, so that anyone checking the figure can follow it.
- Set the period and the standard. Decide the period, for example one week, and the full-time standard for it, for example 40 hours. Use the same standard for every role in the team.
- Decide worked or paid hours. Worked hours exclude paid leave and sickness. Paid hours include them. Pick one basis and state it on the report.
- List every person and their hours. Include part-time, fixed-term and temporary staff, and anyone whose contract hours changed during the period.
- Add the hours. Sum the hours for all people in the team for the period.
- Divide by the standard. Total hours divided by the full-time standard gives FTE.
- Record the exceptions. Note any starters, leavers, long absences and overtime, so that a change in FTE can be explained.
Alternatively, you can convert each person to their own FTE first, by dividing their hours by the standard, and then add the results. The answer is the same, but the per-person view helps when you need to check a single contract.
A worked example you can check by hand
The example uses assumed figures for a six-person customer operations team with a 40-hour standard week. The numbers illustrate the method, not a benchmark.
| Person | Contract | Hours worked in the week |
|---|---|---|
| Team lead | Full-time | 40 |
| Agent A | Full-time | 40 |
| Agent B | Full-time | 40 |
| Agent C | Part-time, 20 hours | 20 |
| Agent D | Part-time, 24 hours | 24 |
| Weekend cover | Part-time, 12 hours | 12 |
| Total | 176 |
The calculation is 176 hours ÷ 40 hours = 4.4 FTE. The team has six people but represents about four and a half full-time posts. A planner who used headcount would overstate capacity by more than a third. Paid hours would differ from worked hours in any week that someone takes paid leave, which is why the basis must be stated on the report.
Rules for part-time staff, leave and overtime
Most disagreements about FTE come from these three cases. The right answer depends on how your organisation uses the figure, so agree the rule with whoever owns the staffing budget, and apply it every period.
| Situation | Common treatment | What to record |
|---|---|---|
| Paid annual leave or public holiday | Counted in paid hours; excluded from worked hours | The basis you use, and the leave days taken |
| Long-term sickness or parental leave | Often excluded from active FTE, so cover can be planned | Start and end dates, and whether cover is in place |
| Overtime | Counted in worked hours if it is actually worked | Overtime hours separately, so that they do not hide a gap |
| Temporary or agency cover | Counted in the team only if your rule says so | Whether agency hours are included, and why |
Leave in particular should be recorded through the same system that approves it. If leave is requested on paper or in a chat thread, the FTE figure will lag behind reality, and the team will appear to have more capacity than it does.
Common mistakes that distort FTE
- Using headcount instead of hours. Part-time staff are counted as whole people, which overstates capacity and understates the gaps in cover.
- Mixing worked and paid hours. A report that uses paid hours in one month and worked hours in the next makes the trend meaningless.
- Using different full-time standards. Some contracts are 37.5 hours and others 40. Pick one standard for the report, or convert each contract to its own FTE first.
- Ignoring starters and leavers mid-period. Use the hours each person actually worked in the period, not their contract hours for the whole month.
- Forgetting temporary cover. If agency or seasonal staff fill gaps, the report should show them, or the team will look smaller than it is on the floor.
Using FTE for planning and cost reports
FTE is most useful when it is compared over time and against the work the team does. Track FTE alongside volume, such as orders handled or calls answered, so that you can see whether the team is keeping pace. Divide labour cost by FTE to compare teams of different sizes, but use the same cost definition in each case, and keep the pay detail in your payroll reports. Turnover changes FTE as well, so read this figure with our guide to how to calculate employee turnover rate. For the wider systems question, our ERP for small business guide explains where staffing data usually belongs.
For many small businesses, the difficulty is not the arithmetic but gathering hours from several places. Leave records, rotas and payroll often sit in different files. In Dika Ops, HR records sit on the same record as the rest of the business, and leave requests go through approval, so the hours behind an FTE figure come from one source. If your staffing data is spread across several tools, the team at Dika Design can help you bring it together through our data platforms and business intelligence work, or build staffing reports into your own systems through our enterprise applications service.
Frequently asked questions
Is FTE the same as headcount?
No. Headcount counts each person once, while FTE measures the hours those people work relative to a full-time post. The two numbers differ whenever part-time, reduced-hours or fixed-term staff are part of the team.
What full-time standard should I use?
Use the standard hours in your employment contracts or your organisation's policy, such as 37.5 or 40 hours a week. Whatever you choose, state it in the report and keep it the same across periods, or convert each contract to its own FTE.
Should I count worked hours or paid hours?
Worked hours show the capacity actually on the floor. Paid hours include leave and sickness, which is useful for budgeting. Many organisations report both. Choose a primary basis, label it clearly, and do not switch between them without explaining the change.
How do I calculate FTE for a single person?
Divide the person's contracted weekly hours by the full-time standard. Someone contracted for 20 hours in a 40-hour standard week is 0.5 FTE. The same method works for monthly hours, provided the standard uses the same period.
Do I need to follow employment law when calculating FTE?
FTE is an internal planning measure, but the hours it uses come from contracts, timesheets and leave records that are governed by employment rules in your country. Check any rule that affects how hours or leave are recorded with your HR adviser or accountant.
Summary and next step
To calculate FTE, add the hours worked by the team over a period and divide by the full-time standard for that period. Decide whether you use worked or paid hours, apply the same standard to every role, and record leave, overtime and temporary cover the same way each time. If you want rotas, leave and headcount reporting in one place, request a demo of Dika Ops and we can show you how the HR module supports the hours behind the figure.



