Explore Dika Ops

How to Count Characters in a Word Document Step by Step

How to count characters in a Word document, with and without spaces, and check the result against the limit for a title, SMS, post or caption.

7 min read Digital marketing
Person typing on a keyboard beside a small potted plant

To count characters in a Word document, open the Review tab, choose Word Count and read the two character figures in the dialog: one with spaces and one without. That gives you the length of the whole file. If you only need a short passage, such as a product title or an SMS, select it first and the dialog reports the selection.

Word counts the characters of the file, but the limit you need is often set by a platform, a template or a tool. For those checks, paste the text into our word counter, which runs in your browser, needs no sign-up and shows the character count against common limits as you type. This guide covers both steps and explains how to read the figures without mixing them up.

Characters with spaces and without spaces

Word reports two character figures, and they answer different questions. The figure with spaces is the length of the text as a reader sees it. The figure without spaces is closer to how some systems count a field, although spacing rules vary between platforms and between languages.

Always note which figure you used. A title that is 58 characters with spaces may be 50 without, and a platform limit can be set on either basis. If you are unsure, use the figure with spaces, because it is the stricter of the two for most limits.

FigureWhat it includesWhen to use it
Characters (with spaces)Every letter, number, punctuation mark and spaceTitles, descriptions and most platform limits
Characters (no spaces)Everything except spacesCodes, identifiers and some database fields
WordsGroups of text separated by spacesEssays, articles and reports with word limits

How to count characters in a Word document step by step

  1. Open the document and click once in the text so the cursor is inside it.
  2. Go to the Review tab and choose Word Count. You can also click the word count in the status bar at the bottom of the window.
  3. Read the Characters (with spaces) figure, then the Characters (no spaces) figure.
  4. To count one passage, select it first and open the dialog again. Note that the figures now refer to the selection.
  5. Check the options at the bottom of the dialog. Choose whether textboxes, footnotes and endnotes are included, to match the rule you are working to.
  6. Copy the passage into our word counter to compare it with the limit for its destination, then make your edits and recount.

Menu names can differ slightly between versions of Word and between Windows and Mac, so look for the Word Count command on the Review tab if the labels above do not match your screen.

Person typing on a keyboard beside a small potted plant
Count the selection first when you only need one title or caption.

Check the limit for where the text is going

Character limits depend on the destination. A search title, a meta description, a short message and a social post each have different rules, and the rules change over time. Treat the figures below as guides, because each platform truncates or counts text in its own way.

DestinationGuide limit used in our word counterTip
Search titleAbout 60 charactersResults truncate by pixel width, so check the preview
Meta descriptionAbout 155 charactersLead with the answer the searcher wants
X post280 charactersCount links and emoji with care
Single SMS160 charactersLonger messages are split and may cost more to send
Instagram caption2,200 charactersOnly the first lines show before the reader taps more
LinkedIn post3,000 charactersShorter posts often read better on a phone

For the search title and description, our search result preview tool helps you see how the text may look in results, which is more useful than a character count alone.

Why the same text gives different counts

Two people counting the same paragraph can get different results. The difference usually comes from invisible characters, line breaks, tabs, double spaces, or text that was pasted with its formatting. Word may count a line break differently from a space, and a platform may count an emoji as more than one character.

  • Remove double spaces with a find and replace before you count.
  • Paste as plain text when you move copy from another document into a field.
  • Count emoji and links separately if the platform counts them differently.
  • Write down the method you used, so a later count can be checked against it.

Shortening text without losing its meaning

When a title or message is too long, start with the words that add no information. Phrases such as "in order to", "the best way to" and "make sure that" can often go. Keep the subject, the action and the benefit, because those are what a reader or search engine uses to decide whether the text is relevant.

Write the longer version first, then cut. It is easier to see what to remove when the full idea is on the page, and you keep a record of the original wording if you need to restore a point later.

Product and service copy in Word

Many businesses draft product descriptions, category text and catalogue entries in Word before they publish them. Those files often need short versions for search, marketplace fields and printed material. Keep one master document, count each version separately, and record which limit each version meets.

If your team needs a website or commerce set-up that keeps copy, images and product data consistent, our enterprise web and digital commerce service covers that work. For captions and campaign text alongside visuals, Dika Studio is the AI production workspace we built for editable designs and video, where the text and the assets can be reviewed together.

For more on search, see our posts on Shopify SEO and SEO mistakes small business websites make, which explain where titles and descriptions fit in the wider plan. You can also visit our homepage or contact us with a question about your content.

Frequently asked questions

How do I count characters in Word on a Mac?

Open the Review tab and choose Word Count, or click the word count in the status bar. The dialog shows characters with spaces and without spaces. Menu labels can differ slightly between versions, so look for the Word Count command if the names do not match.

Do spaces count as characters in Word?

Yes, in the figure labelled with spaces. Word also shows a figure without spaces, so you can use whichever matches the limit you are checking. Always state which one you used.

How do I count characters in only part of a Word document?

Select the passage, then open Word Count from the Review tab. The dialog reports the selection, so you can check a title or paragraph without counting the whole file.

Why does my word counter result differ from Word?

Differences usually come from line breaks, double spaces, hidden formatting or emoji. Paste the text as plain text, remove double spaces and compare the figures again.

Can I use one character count for every platform?

Not reliably. Each platform sets its own rules, and limits change over time. Use the count as a first check and confirm the limit on the platform you are publishing to before you finalise the text.

Summary and next step

Use the Review tab and Word Count to read the characters with and without spaces, select a passage when you need only part of the count, and check the final text against the limit for its destination. Our word counter is useful for that last step, and the tools index lists the other checks we offer. If you want help turning a set of product texts into a clean, consistent web process, get in touch and we will suggest a practical first step.

Have a project in mind? Let us talk it through.

Tell us what you want to improve. We will reply with a clear next step.