How to make a QR code for Wi-Fi comes down to one form: pick the Wi-Fi network option, enter the exact network name, password and security type, then download the code. A guest who scans it with a phone camera can join the network without typing anything, which saves time at reception, in meeting rooms and in cafés.
You can create the code in our QR code generator. It has a Wi-Fi network content type with its own fields and shows the encoded content before you download. This guide covers those fields, the security trade-off most people overlook, and a test routine that catches mistakes before you print the sign.
What a Wi-Fi QR code contains
A Wi-Fi code does not link to a web page. It holds the details a phone needs to join a network: the network name, the password, the security type and whether the network is hidden. The phone reads those details and offers to join, which means the password is stored inside the image in a form any scanner can decode.
| Field | What to enter | Check before you print |
|---|---|---|
| Network name | The exact name phones show, for example Office-Guest | Copy it from the router settings rather than from memory, because spaces and capitals matter |
| Password | The current Wi-Fi password | Connect one phone by hand with the same details to confirm they work |
| Security | WPA for most networks, WEP only for older equipment, nopass for an open network | Choose the setting your router uses; a wrong choice stops phones from joining |
| Hidden network | 1 if the network does not broadcast its name, otherwise 0 | Most networks broadcast their name, so 0 is the usual choice |
Step by step: create the Wi-Fi code
- Open the QR code generator and open the content type list.
- Select Wi-Fi network. The fields change to network name, password, security and hidden network.
- Type the network name exactly as it appears on your router.
- Type the password, then check it for capitals, digits and symbols before you continue.
- Choose the security type. Select WPA unless your equipment is much older.
- Set hidden network to 1 only if the network is hidden. Leave it at 0 otherwise.
- Check the preview, set the size, quiet zone, colours and error correction as described below, then download as PNG or SVG.
Choose error correction, colour and size
A Wi-Fi code on a reception desk is usually printed once and scanned many times, so it should stay sharp and easy to read. The tool offers four error-correction levels. Higher levels survive more damage but need a denser code, which trades resilience against scan distance.
| Level | Recoverable damage (tool figure) | Use it for |
|---|---|---|
| L | About 7% | Codes shown on a clean screen |
| M (default) | About 15% | Most printed signs and screens |
| Q | About 25% | Signs that may be scuffed or folded |
| H | About 30% | Codes with a logo, or signs that get touched and wiped often |
Keep the colours dark on light, keep a quiet zone of at least 4 modules, and print the code at least about 2 cm wide. The tool also warns about low contrast and inverted colours, so act on those warnings before you print.

Protect the password before you print
This is the part most guides skip. Anyone who scans a Wi-Fi code can read the password, and a code printed on a sign can be photographed, copied or shared. Treat the code with the same care as the password itself.
- Use a separate guest network for visitors, so the code never reveals the password your staff and equipment use.
- Print the code only where guests are meant to see it, such as reception or a meeting room, and keep it off public noticeboards and social media.
- Change the password when a staff member leaves or when a sign goes missing, then generate and print a new code.
- Keep the network name and password in your IT notes, so anyone on the team can rebuild the code.
Test the code with real phones
A preview on your laptop shows that the code is correct, but it does not prove a phone will join the network. Test the printed proof on at least two phones before you put it up.
- Scan the printed page, not the screen, with an iPhone camera.
- Accept the offer to join, then confirm the network shows as connected.
- Repeat with an Android phone, because the scanner and the join prompt differ between systems.
- Scan from the distance a guest would stand, such as a reception counter.
- After any password change, scan the new printed code again before you remove the old sign.
Where to place Wi-Fi codes
Put the code where guests stop and look: at reception, on a meeting room door or on a table card in a café. Avoid spots where a screen, a coat or direct sunlight will cover it. The best place is at eye level with white space around the code, so the camera can find its edges on the first attempt.
New staff need network access on their first day too. Our guide to employee onboarding lists the access checks worth making in the first week, and Wi-Fi is one of them. Keep the staff network and the guest code separate, as described above. A staff member with a company login usually connects to the staff network directly, so the guest code is for visitors and temporary contractors.
A Wi-Fi code is a copy of your settings, so it needs the same care as the router. When the password changes, the code stops working until you replace it, so store the code file with your router notes and reprint it as part of any password change. Write the date of each printed version on the back of the sign, so the team can see at a glance which one is in use. If your office needs more than a sign, for example access rules that depend on who is in the building, our custom software team can scope that work with you.
Frequently asked questions
Does a Wi-Fi QR code work on iPhone and Android?
Current iPhone and Android cameras can read Wi-Fi codes and offer to join the network. Older devices and some third-party scanner apps may behave differently, so test on both platforms before you rely on the sign.
Can I make a Wi-Fi QR code for an open network?
Yes. Choose the nopass security type and leave the password empty. An open network is not encrypted, so use this only for a network you are happy for anyone nearby to join.
What happens if I change the Wi-Fi password?
The old code stops working, because it still contains the old password. Generate a new code with the current details, print it and replace the sign, then test it on a phone.
Is it safe to print a Wi-Fi password in a QR code?
It is safe only if you accept that anyone who can scan the code can read the password. Use a guest network, show the sign only where visitors can see it, and do not publish the image online.
When should I set hidden network to 1?
Set it to 1 only if your router does not broadcast the network name. Most networks are visible, so the default of 0 is the usual choice, and a wrong setting can stop phones from joining.
Next step for your office
Create a guest code this week, test it on two phones and place it where visitors will see it. The tools page lists the other tools we publish, including the barcode generator for stock labels. If you are planning the wider office setup, talk to us. We are Dika Design, and we are happy to look at what your team needs. For a designed sign with your logo, Dika Studio is the design workspace we build, with editable layouts that you can update when the network changes.



