Warehouse pallet capacity and layout calculator
Enter the size of your store, the aisle width, the rack and the pallet, and see how many pallet positions fit, how much of the floor they use, and a top-view plan.
- Racking
- Aisle
- Unused
The working
How to calculate pallet capacity
The calculator assumes rows of pallet racking along the length of the building, set back to back in pairs, with an aisle in front of each pair. Enter your own measurements and it counts the positions that fit.
- Choose metric or imperial Floor sizes use metres or feet. Pallet and rack details use centimetres or inches. Changing the unit converts the numbers you have entered.
- Pick the pallet Choose a EUR pallet, a UK or ISO pallet, a US pallet, or enter your own length and width.
- Choose the orientation Decide whether the long side of the pallet runs into the rack or along the beam. This changes how many fit per row.
- Enter the floor and the height Give the usable length and width of the floor, the aisle width your trucks need and the clear height under the roof or sprinklers.
- Set the rack details Enter the rack depth if it differs from the pallet depth, the gap between back-to-back racks, the clearance between pallets, and the loaded pallet height with the beam allowance.
- Read the capacity See the pallet positions in total and per level, the floor utilisation, the density and a plan with racking and aisles.
Tips for better warehouse layouts
- Take the aisle width from the specification of your truck, plus the clearance your safety rules require.
- Measure the clear height to the lowest obstruction, such as sprinklers, lights or roof beams.
- Count the tallest loaded pallet you will store, because the level height must fit every load.
- Leave space for doors, fire exits, loading bays and staging areas, which this simple model does not draw.
- Compare two aisle widths: a narrower aisle gives more positions, but needs suitable trucks.
Common layout mistakes
- Using the gross floor area Columns, walls, offices and docks take space. Enter the usable length and width of the storage area.
- Forgetting the beam height Each level needs space for the beam and clearance above the load. The beam allowance is added to every level.
- Using the wrong pallet orientation Storing the long side along the beam gives more width per position but a shallower rack.
- Treating the estimate as a design Racking must be specified, installed and loaded according to the manufacturer and local regulations. This tool only estimates positions.
Open it pre-filled with a link
Every field accepts a query parameter with the same name, so a link, a script or an AI agent can fill the tool in and run it. Open an example: /tools/pallet-capacity-calculator/?length=40&width=20&aisle=3&height=7
| Parameter | Values | What it does |
|---|---|---|
unit | m · ft (default: m) | m for metres and centimetres, ft for feet and inches. |
length | number | Usable floor length, in metres or feet. |
width | number | Usable floor width, in metres or feet. |
aisle | number (default: 3) | Aisle width in front of each rack pair, in metres or feet. |
depth | number | Rack depth in centimetres or inches. Empty uses the pallet depth. |
flue | number (default: 15) | Gap between back-to-back racks in centimetres or inches. |
height | number (default: 7) | Clear height in metres or feet. |
pallet | eur · uk · us · custom (default: eur) | eur, uk, us or custom. |
pl | number | Custom pallet long side in centimetres or inches. |
pw | number | Custom pallet short side in centimetres or inches. |
orient | deep · across (default: deep) | deep stores the long side into the rack, across stores it along the beam. |
ph | number (default: 150) | Loaded pallet height in centimetres or inches. |
beam | number (default: 15) | Beam and clearance allowance per level in centimetres or inches. |
gap | number (default: 10) | Clearance between pallets along the beam in centimetres or inches. |
levels | number | Number of levels. Empty calculates it from the height. |
What this pallet capacity calculator includes
It is a quick planning aid for a rectangular store. It does not replace a racking design, and it states every assumption.
- Pallet standards EUR (1200 by 800 mm), UK and ISO (1200 by 1000 mm), US (48 by 40 in) or your own size.
- Back-to-back racking Rack pairs with a gap between them and an aisle in front of each pair, plus a single row against the wall when it fits.
- Levels from the height The number of levels follows from the clear height, the loaded pallet height and the beam allowance, or you can set it yourself.
- Positions and utilisation Pallet positions in total and per level, the share of the floor covered by pallets, and positions per square metre or foot.
- Top-view plan A drawing of the floor with racking, aisles and any unused strip, scaled to the size of your store.
- Metric and imperial Switch units and the numbers you have entered are converted for you.
- Step-by-step working Each part of the calculation is written out with your numbers, so you can check it.
- Private by design All figures are calculated in your browser and are never uploaded.
Common pallet sizes
| Pallet | Size | Where you see it |
|---|---|---|
| EUR / EPAL 1 | 1200 × 800 mm | Widely used in Europe |
| UK and ISO 1 | 1200 × 1000 mm | Common in the UK and for international freight |
| US (GMA) | 48 × 40 in (1219 × 1016 mm) | Standard in North America |
| Custom | Your own length and width | Half pallets, display pallets and special sizes |
Who uses a pallet capacity calculator
Anyone who stores goods on pallets and has to decide how much space is enough can use a quick estimate before a detailed design.
Companies looking for a warehouse
Estimate how many pallets a building can hold before you view it or ask for quotes.
Warehouse and logistics managers
Test how a different aisle width or one more level changes capacity.
Online sellers outgrowing a garage
Work out how much floor you need as stock grows.
Manufacturers planning storage
Check that a new line of finished goods will fit in the existing store.
Consultants and planners
Make a first estimate for a client before commissioning a racking design.
Students of logistics
See how aisle width, depth and height trade off against capacity.
The estimate uses a simple model. Real capacity depends on the racking system, the trucks, fire and safety rules and how the building is shaped.
How this connects to running the business
Knowing how many pallets fit is only half of the question. The other half is what is on them and where it is. We build Dika Ops so that stock, locations, receipts and orders share one record, and a warehouse can see how full it really is without counting by hand. See how it fits together at dikaops.com
Frequently asked questions
How are pallet positions calculated?
The tool places pairs of back-to-back rack rows across the width, each pair with an aisle in front, and a single row against the wall if one fits. Positions per row come from the length divided by the pallet width plus the gap. The total is rows times positions per row times levels.
How are the levels worked out?
Levels equal the clear height divided by the loaded pallet height plus the beam allowance, rounded down. You can override the result with your own number of levels.
What does floor utilisation mean here?
It is the area covered by pallets at floor level divided by the total floor area. The rest is aisles, the gaps between racks and unused space.
Does it include docks, offices and fire exits?
No. Enter only the usable storage area. Doors, loading bays, staging areas, offices and escape routes need their own space.
Can I plan for narrow aisles?
Yes. Enter the aisle width your trucks need. Narrower aisles give more positions, but they require trucks designed for them.
Why does the pallet orientation matter?
If the long side runs into the rack, the rack is deeper and each position uses less length along the beam. If the long side runs along the beam, the rack is shallower and each position takes more length.
Is the result a racking design?
No. It is an estimate for planning. Racking has to be designed, installed and loaded to the manufacturer's data and the regulations that apply to you.
Can I link to a calculation?
Yes. Every control accepts a query parameter, so a link can open the tool with your measurements filled in. The list is in the first tab.
Have a project in mind? Let us talk it through.
Tell us what you want to build or improve. We reply with a clear next step.